ChemCure® Cycloaliphatic Amines
Modified cycloaliphatic amines from IPDA are one of the most commonly used curing agents. Because of their low viscosity, they can be used for low VOC coatings. They produce coatings with a fast cure rate, short pot life and are also suitable for low temperature cure. They have good water/moisture and chemical resistance, weatherability, low blush, water spotting. The ring structure also provides slightly more structural “stretch” than aliphatic curing agents, imparting better impact resistance.
Product |
Description | Viscosity cP @ 25ºC | Amine H+ Eq. Weight | PHR | Gel Time (minutes) | Density | Color Typical Gardner |
---|---|---|---|---|---|---|---|
ChemCure® 286 | Modified decoupage type material | 35 ~ 90 | 90 | 48 | 30 | 8.4 | 2 |
ChemCure® 310 |
High gloss and blush resistance flooring. Fast curing and low yellowing |
300 ~ 600 | 111 | 60 | 30 | 8.6 | 1 |
ChemCure® 310M | Very standard product material for epoxy floors | 400 ~ 600 | 111 | 60 | 50 | 8.6 | 1 |
ChemCure® 319 |
Very good aesthetics, fast curing and superior yellowing resistance |
250 ~ 350 | 100 | 56 | 19 | 8.5 | 0.1 |
ChemCure® 337 | Low color curative for chemical resistant floors | 90 ~ 150 | 71 | 38 | 23 | 8.7 | 0.1 |
ChemCure® 365 | Fast through cure, good cosmetics | 100 ~ 300 | 94 | 51 | 20 | 8.7 | 1 |
ChemCure® 390 | Fast cure 3:1 with ChemRes™ 618 | 250 ~ 550 | 74 | 37 | 30 | 8.4 | 2 |
ChemCure® 400 | Part B of lower cost low yellowing floor system | 75 ~ 130 | 89 | 44 | 28 | 8.4 | 1 |