Incroslip™ B, a specially developed, slip additive with exceptional stability and low odor and offers an optimized combination of slip and stability tailored to your application. It is particularly useful as a torque release agent in closures and is designed to meet the exacting demands of the bottled water industry.
Incroslip™ B additive can be dispersed evenly through the polymer in the melt phase. It migrates to the surface of the polymer where it forms a thin lubricating layer. This layer reduces coefficient of friction between surfaces and reduces unwanted adhesion.
Guidelines for Use:
Incroslip™ B internal additive can be incorporated into resin as supplied or via masterbatch / pre-blend. Experience has shown that simple manual mixing prior to processing will normally give an acceptable dispersion, though mechanical means are preferred.
Typical addition levels are 0.1 - 0.2% for film and 0.2 - 0.5% for cap applications.
|Color||Hazen at 25°C||< 420|
Form at 25°C
Industry Market Areas
- Caps and closures
- Injection molding