IncroMax™ 400

IncroMax™ 400 additive is designed as a friction control and Anti-tack agent for high temperature or polar polymers at very low addition levels.

It is suitable for film and sheet extrusion as well as injection molding applications.

IncroMax™ 400 additive can be dispersed evenly through the polymer in the melt phase. It migrates to the surface of the polymer, where it forms a thin lubrication layer. This layer reduces the coefficient of friction between surfaces and reduces unwanted adhesion.

Guidelines for Use:

IncroMax™ 400 additive is an internal additive and can be incorporated into resin as supplied or as a highly loaded concentrate. Please contact your local sales represntation for more information. 

Typical addition levels: 0.05 - 0.2% in extrusion applications, 0.2 - 1% in injection molding applications.

 

Key Specs

Property	Units	Value
Amine value	mgKOH/g	< 5
Acid value	mg/KOKH/g	< 5
Color AHPA	Gardner at 25°C	7