Optislip^™ SR

Optislip™ SR bio-based, saturated primary amide additive is suitable for use as an anti-blocking additive in polyolefins and rubber.

Optislip™ SR amide additive provides anti-blocking performance, even at low temperatures, as it quickly migrates to the surface of the polymer to form a thin lubricating layer. This reduces coefficient friction between surfaces and prevents any unwanted adhesion.

Guidelines for Use:

Optislip™ SR internal additive can be incorporated into resin as supplied or via masterbatch / pre-blend. Experience has shown that simple manual mixing prior to processing will normally give an acceptable dispersion, though mechanical means are preferred.

Typical addition levels vary depending on polymer and lubrication required.

Recommended levels are around 500 - 2000ppm in films and 0.2 - 1.0% in molding applications.

Key Specs