Atmer™ 7103
Atmer™ 7103 concentrate is a combination of additives in polyethylene, providing a synergistic anti-static effect.
Using a concentrate allows for better dispersion and overcomes complications encountered when using additives in their normal physical forms.
Concentrates are added to the process like other resins. After cooling, the additives migrate to the surface of the polymer where they interact with atmospheric moisture, reducing surface resistivity and allowing dissipation of static charge.
Guidelines for Use:
Atmer™ 7103 internal additive should be added to the melt phase during processing. Experience has shown that simple manual mixing prior to processing will normally give an acceptable dispersion, though mechanical means are preferred.
Typical addition levels are 0.6 - 1 % in injection molding and sheet extrusion.
Key Specs
Property | Units | Value |
---|---|---|
Active content | % m/m | 47-53 |
Moisture | % | < 1.5 |
Softening point | °C | > 100 |
Regional Availability
Global
Form at 25°C
Pellet
Brochures
Industry Market Areas
- Electronics – packaging
- Film production
- Injection molding
Function & Effects
- Anti-static – migratory
Features & Benefits
- Effective dosing of additives
- Better distribution of additives in base polymer
- Reduction of fuming / smoking in processing
Regulatory
- Globally available. Please contact us for specific inventory clearances.