IncroMold™ F
IncroMold™ F internal mold release additive is used to improve cycle time and productivity in polyolefins. It is suitable for use up to temperatures of around 230°C depending on residence time in the processing equipment.
IncroMold™ F additive can be dispersed evenly through the polymer in the melt phase. It migrates to the surface of the polymer where it forms a thin lubricating layer. This layer reduces coefficient of friction between surfaces and reduces unwanted adhesion.
Guidelines for Use:
IncroMold™ F internal additive can be incorporated into resin as supplied or via masterbatch / pre-blend. Experience has shown that simple manual mixing prior to processing will normally give an acceptable dispersion, though mechanical means are preferred.
Typical addition levels are 0.2 - 0.5% for molding applications.
Key Specs
Property | Units | Value |
---|---|---|
Origin | N/A | Vegetable |
Color | Gardner at 25°C | < 2 |
Bio-based content | % | 100 |
Regional Availability
Global
Form at 25°C
Bead
Brochures
Industry Market Areas
- Automotive – automotive plastics
- Injection molding
Function & Effects
- Mold release
- Scratch resistance
Features & Benefits
- Consistent mold release
- Reduced cycle times
- Continuous running
- Improved surface finish
- Reduced machine wear and cleaning
Regulatory
- Globally available. Please contact us for specific inventory clearances.
Food contact approval:
- Some food contact approvals available. Contact us for more details.