Ionphase™ abSTAT
Ionphase™ abSTAT permanent anti-static additive is used during extrusion, compounding and injection molding of ABS and PP. It is used in applications such as thermoformed trays in the electronics industry and for various injection molding applications (ATEX, EPA, dust prevention).
Ionphase™ abSTAT static dissipative, polymeric polymer additive is commonly known as a permanent anti-static additive. These additives are used to control static electricity in plastics. This works by forming an interpenetrated network within the host polymer reducing the resistivity of the blend.
Guidelines for Use:
We suggest adding the material as an additive during the extrusion process. Compounding into the host polymer is highly recommended before injection molding.
The required loading of Ionphase™ abSTAT additive depends on the host polymer, processing method and the targeted level of static dissipation.
Key Specs
Property | Units | Value |
---|---|---|
Melting point | °C | 175 - 206 |
MFI (230°C / 5 kg) | g/10 min | 70 |
Volume resistivity | Ωm | 1 x 105 |
Regional Availability
Global
Form at 25°C
Pellets
Brochures
Industry Market Areas
- Automotive – automotive plastics
- Electronics – packaging
- Injection molding
Function & Effects
- Anti-static – permanent
Features & Benefits
- Permanent and non-migrating
- Not humidity dependent
- Excellent processability and surface quality
- Good compatibility towards the host polymer
- No stickiness of the molded part
Regulatory
- Globally available. Please contact us for specific inventory clearances.